How do you maintain and clean your router table plate insert?

Maintaining and cleaning your router table plate insert is essential to ensure it lasts long and functions correctly. Below are some steps to follow when maintaining and cleaning your router table plate insert

 

Clean Regularly 

Routinely clean your router table plate insert to prevent buildup of sawdust and debris. Use a soft-bristled brush to sweep the sawdust off the insert. You can also use a vacuum cleaner to remove the sawdust.

 

Use Cleaning Solution 

To clean stubborn stains or marks, you can use a cleaning solution such as a degreaser or a citrus cleaner. Apply the cleaner to the insert's surface and use a soft cloth to wipe off the dirt or stain. Rinse the insert with clean water to remove any excess cleaner.

 

Dry the Insert 

After cleaning, dry the insert with a clean cloth to prevent rust or corrosion. Ensure that the insert is completely dry before remounting it on the router table.

 

Lubricate the Insert 

Lubricate the insert's mounting screws with a small amount of lubricant such as silicone spray or grease to prevent rust and make it easier to remove the screws when needed.

 

Check the Insert's Levelness 

Routinely check the insert's levelness to ensure that it is stable when mounting the router. If it is not level, adjust the screws to level it with the table.

 

Store the Insert 

When not in use, store the insert in a dry and clean place to prevent corrosion and rust.

 

In conclusion, maintaining and cleaning your router table plate insert is important to ensure it lasts long and functions correctly. Routinely clean the insert using a soft-bristled brush or a vacuum cleaner to prevent sawdust buildup. Use a cleaning solution to clean stubborn stains and marks and dry the insert with a clean cloth. Lubricate the insert's mounting screws to prevent rust and check the insert's levelness to ensure stability when mounting the router. Store the insert in a dry and clean place when not in use to prevent corrosion and rust. By following these steps, you can maintain the router table plate insert and ensure it lasts long and functions correctly.

 

How to maintain router table?

Maintaining your router table is essential to ensure that it continues to function properly and provide you with accurate cuts and shapes. Regular maintenance can also extend the lifespan of your router table and save you money in the long run. In this article, we will discuss some tips for maintaining your router table.

 

Keep it clean

One of the most important things you can do to maintain your router table is to keep it clean. After each use, remove any sawdust, debris, or excess material from the table and surrounding area. Use a soft-bristled brush or a vacuum to clean the surface and ensure that the material does not accumulate in the router or clog the dust collection system.

 

Lubricate moving parts

Another essential maintenance tip is to lubricate the moving parts of your router table. This includes the router lift, the fence, and any adjustable features. Use a non-sticky lubricant such as dry silicone spray to prevent dust and debris from sticking to the parts.

 

Check the alignment

Checking the alignment of your router table is crucial to maintaining its accuracy. Make sure that the fence is straight and square to the table, and that the bit is centered and level. Misaligned parts can cause your cuts to be inaccurate and lead to additional wear and tear on your tools.

 

Replace worn parts

Over time, parts of your router table may become worn or damaged. It is important to replace these parts as soon as possible to avoid further damage to your table or tools. Check the router lift mechanism, the bearings, and the belts for wear and tear, and replace them if necessary.